-
Milling-turning compund lathes
-
CNC lathe with inclined rail
-
Flat-bed CNC Lathe
-
Engine lathe
-
Vertical machinging center
1、Y-axis:It realizes a compound function of turning and milling using an interpolated Y-axis structure,or turret with Y-axis structure.(model shall be marked with “Y”）
2、spindle:The spindle is structured with a high-power,large-torque,and high-precision sleeve,characterized by increased reduction ratio and good low-speed performance,and configured with a high-precision internal magnetic ring encoder,thereby being suitable for C-axis cutting.
3、Turret:It is configured with the servo motor indexing, crankset positioning and hydraulic clamping mechanisms.It achieves milling-turning machining by a variety of fixed tool seats,0°，90°，and universal milling heads.
4、X/Z-axis:It is driven by a high-grade imported precision ball screw with the roller guide widened and span increased,thereby with standing heavy cutting.
5、Tailstock:Automatic programmable tailstock for easy operation and application
Item | unit | Specification | Remark | |
Working range | Maximum spinning diameter | mm | Φ450 | |
Maximum turning diameter of disk parts | mm | Φ350 | ||
Maximum machining length | mm | 250 | ||
Saddle inclination against the level | ° | 35° | ||
Spindle | Spindle motor | kw | 7.5/11（continuous/30minutes） | |
Spindle end | A2-5 | |||
Diameter of spindle through-hole | mm | Φ56 | ||
Maximum rotational speed of spindle | r/min | 4500 | ||
Spindle precision | mm | Radial clearance≤0.008， axial clearance≤0.005 | ||
Coordinate axis | Maximum travel along the horizontal direction(X-axis) | mm | 220 | |
Maximum travel along the vertical direction(Z-axis) | mm | 250 | ||
Maximum travel of interpolated Y-axis | mm | ±35 | ||
X-axis serve unit | 15Nm,3000r/min | |||
Z-axis serve unit | 15Nm,3000r/min | |||
Maximum feed rate along the X-axis | m/min | 24 | ||
Maximum feed rate along the Z-axis | m/min | 24 | ||
Positioning precision | mm | X±0.006,Z±0.011,Y±0.006 | ||
Repeated Positioning precision | mm | X±0.003,Z±0.003,Y±0.003 | ||
Tool post | Type of tool post | Servo power tool post | ||
Number of tools | 12-station | |||
Specification of outer diameter and end face tool holder | mm | 20X20 | ||
Diameter of inner hole tool seat | mm | Φ25 | ||
Specification of power unit chuck | ER20 | |||
Clamping device | chuck | 6"three-jaw medium hollow oil pressure chuck | ||
Hydraulic cylinder | Medium hollow rotary cylinder | |||
Hydraulic tailstock | Maximum travel of centre sleeve | 100 | ||
mm | 400 | |||
Taper of the center sleeve | MT5 | |||
Hydraulic system | Oil tank capacity | L | 40 | |
Hydraulic pump pressure | kg | 35 | ||
Chip removal | Auto chip conveyor(optional） | Chain plate type chip removal conveyor and chip collecting truck | ||
Others | Total capacity of lathe power supply | kw | 24 | |
Boundary dimension：length x width x height | mm | 2200x1600x1800 | ||
Net weight of lathe | kg | 3000 |
